RCA CC9360 - Start Recording; Play Your Recording

14 Chapter 1
Connections & Setup
Start recording
1. Remove the lens cap.
2. Press in the Lock button and set the Power
switch to
A
(automatic record). (The POWER
indicator comes on.)
3. Press and release the Recording Start/Stop
button to start recording. (REC appears in the
viewfinder or LCD monitor (but won’t be
recorded)).
4. When finished recording, press and release the
Recording Start/Stop button again to stop
recording. The camcorder is now in the record-
pause mode. (PAUSE appears in the viewfinder
or on the LCD monitor.)
Play your recording
1. Press in the Lock button while setting the Power
switch to
. (The POWER indicator comes
on.)
2. Press the Rewind button to reverse the tape
to the beginning. When rewound completely,
the camcorder automatically stops.
3. Press the Play/Pause button
/
to start
playback. View the recording using the LCD
monitor or viewfinder.
4. Press the Stop button
when finished playing
the tape.
Notes:
• Sound will play back if the LCD monitor
is open or closed. To adjust the volume,
use the Zoom Lever (also labeled
VOL - +).
• More information about using the LCD
monitor and viewfinder can be found on
pages 24-25.
B
L
A
N
K
S
E
A
R
C
H
F
O
C
U
S
+
+
BAT. RELEASE
P
L
A
Y
O
F
F
Power switch
Lock
button
EXPOSURENIGHT
MODE
BACK
LIGHT
P. AE
MENU/
BRIGHT
SNAP
SHOT
CHARGE
W
-
+
BAT. RELEASE
BLANK SEARCH
VOL.
FOCUS
Playback buttons on top of
the camcorder include:
Stop ( )
Rewind ( )
Play/Pause (
/
)
Fast Forward ( )