Advanced Features
60 Chapter 5
Notes:
• The System and Display functions which are set when the Power switch is set to
M
(manual record) are also applied when the Power switch is set to .
CLOCK ADJ. only appears when the Power switch is set to
M
.
• The Display settings are effective even when the Power switch is set to
A
.
TIME OFF Factory Preset: Time code is not displayed.
CODE
ON Time code is displayed on the camcorder and a connected TV.
Frame numbers are not displayed during recording.
CLOCK Allows you to set the current date and time.
ADJ.
To Next Page
Loading...
