RCA D770 - D 770 Universal Remote Control User Manual

Programming For TV—Direct Entry Method
1. Manually turn on the TV.
2. Locate the enclosed TV Code List. Find
your brand of TV.
3. Press and hold the TV key.
4. Enter a code from the code list.
5. Release the TV key, and then press
ON•OFF to see if the TV responds to
the remote control commands. If it
doesn’t, try pressing the TV key and
then ON•OFF again.
6. If you get no response, repeat these steps
using the next code listed for your brand
until the TV responds to the remote
control commands.
7. Enter your code here for easy reference.
(OFF)
(OFF)
TV CODE
Programming For VCR—Direct Entry Method
1. Manually turn on the VCR.
2. Locate the enclosed VCR Code List.
Find your brand of VCR.
3. Press and hold the VCR key.
4. Enter a code from the code list.
5. Release the VCR key, then press
ON•OFF to see if the VCR responds
to the remote control commands. If
it doesn’t, try pressing the VCR key
and then ON•OFF again.
6. If you get no response, repeat these
steps using the next code listed
for your brand until the VCR responds
to the remote control commands.
7. Enter your code here for easy reference.
Programming For DVD—Direct Entry Method
1. Manually turn on the DVD player.
2. Locate the enclosed DVD Code List.
Find your brand of DVD player.
3. Press and hold the DVD key.
4. Enter a code from the code list.
5. Release the DVD key, and then
press ON•OFF to see if the DVD
responds to the remote control
commands. If it doesn’t, try pressing
the DVD key and then ON•OFF again.
6. If you get no response, repeat these
steps using the next code listed for
your brand, until the DVD responds
to the remote control commands.
7. Enter your code here for easy reference.
(OFF)
(OFF)
DVD CODE
(OFF)
(OFF)
VCR CODE
6

RCA D770 - D 770 Universal Remote Control Specifications

General

Brand	RCA
Model	D770 - D 770 Universal Remote Control
Category	Universal Remote
Language	English