RCA DRD102RW - Page 55

56 Installation/Mounting the Dish
CINDER BLOCK WALL
Material List:
• 4EA. V4"x3"
Machine screws.
• 4 EA. 1/4"Hollow
wall anchors or
togglers.
• 4 EA. 1/4"Flat
washers.
Tool List:
• Drill.
• 1/2"Masonary drill
bit.
• Bubble level or
plumb line.
• 7/16"Box or open end
• Screw driver.
• Pencil.
Figure 38, Mounting DSS foot and Mast Assembly to a Cinder Block Wall