Why is there no image output when a function is selected on my RCA Home Theater Audio System?
If your RCA Home Theater System has no image output when a function is selected, make sure the component is connected correctly and that the input source is properly selected by pressing the correct function button.
Why is sound only heard from one channel on my RCA Home Theater Audio System Home Theater System?
If your RCA Home Theater System is only outputting sound from one channel, ensure that all input cords are securely connected. Additionally, check if the channel level is set to one side and adjust it accordingly.
Why is the display dark on my RCA Home Theater Audio System?
If the display on your RCA Home Theater System is dark, the dimmer or sleep timer might be activated. Press DIMMER again.
Why is my RCA Home Theater Audio System Home Theater System remote control not working?
If your RCA Home Theater System's remote control isn't working, try pointing it directly at the receiver's remote sensor. Ensure you're within 23 feet (7 meters) of the receiver and that there are no obstructions. If it still fails, replace the remote's batteries.
Why is the playback picture poor on my RCA Home Theater System?
If the image output from your RCA Home Theater System is poor, the disc may be dirty. Clean the disc.
What to do if there is low bass response on my RCA Home Theater System?
If you're experiencing low bass response with your RCA Home Theater System, check all speakers for correct polarity (+/–).
How to fix broadcast stations that cannot be selected automatically on my RCA Home Theater Audio System?
If your RCA Home Theater System is not automatically selecting broadcast stations, the signals might be weak. Try connecting an outdoor antenna.
Why is my RCA Home Theater Audio System making a low hum or buzz sound?
If your RCA Home Theater System is producing a low hum or buzz, it could be due to the power line of a fluorescent light or another device installed near the receiver. Place the receiver as far away as possible from electric devices that cause interference.
Why is my RCA Home Theater System power on, but the DVD player does not work?
If your RCA Home Theater System is on but the DVD player isn't working, make sure a disc is inserted and that the DVD or audio CD indicator in the DVD display is lit.
What to do if the receiver does not respond when the buttons are pressed on my RCA Home Theater Audio System?
If your RCA Home Theater System receiver isn't responding when buttons are pressed, it might be due to static electricity. Try disconnecting the power plug from the outlet and then re-inserting it.
Power| power supply | AC 120V ~ 60Hz |
|---|---|
| power consumption | 100 W |
Operating Environment| operating temperature | 41 to 110 F (5 to 43 C) |
|---|---|
| operating humidity | 5% to 85% (no condensation) |
Audio Specifications| signal-to-noise speaker | More than 55dB |
|---|---|
| aux out | 70dB |
| audio dynamic range | More than 80/80dB |
Speaker System| speaker system | Bass reflex |
|---|---|
| speaker unit (HWD) front/rear | 114 x 87 x 108 mm |
| speaker unit (HWD) center | 87 x 160 x 106.5 mm |
Impedance| rated impedance front/center/rear | 8 ohms |
|---|---|
| rated impedance subwoofer | 6 ohms |
Subwoofer Specifications| subwoofer speaker system | Bass reflex |
|---|---|
| subwoofer speaker unit (HWD) | 330 x 174 x 320mm |
Recording System| recording system | Rotary Two-head Helical Scanning |
|---|---|
| tape width | 1/2 inch |
| tape speed SP | 1 5/16 Inch/second (33.35 mm/s) |
Tuner Channels| vhf channels | 2-13 |
|---|---|
| uhf channels | 14-69 |
| catv channels | 1-125 |
Dimensions and Weight| dimensions (HWD) | 96 x 430 x 370 mm |
|---|---|
| weight | 8 Kg |
To Next Page
