RCA Home Theater Audio System User Manual

36 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

owner’s manual

Complete 7-Piece Home Theater Audio System

with DVD Player and VCR

31-5025.fm Page 1 Wednesday, January 15, 2003 5:05 PM

Table of Contents

Other manuals for RCA Home Theater Audio System

User Guide32 pages

Questions and Answers:

N
Natalie CummingsAug 28, 2025
Why is there considerable noise in radio broadcasts on my RCA Home Theater System?
- P
  Phillip McintyreAug 28, 2025
  If you're getting considerable noise in radio broadcasts on your RCA Home Theater System, try tuning to the correct frequency and ensuring the antenna is connected properly. Route any RF (AC-3) and digital cables away from the antenna terminals and wires. For FM, fully extend the FM wire antenna and position it for the best reception, securing it to a wall. If the signal is weak, connect an outdoor FM antenna. For AM, adjust the direction and position of the AM antenna for best reception. If the signal is still weak, connect an additional internal or external AM antenna. Also, try turning off or moving any other equipment that might be causing interference, such as fluorescent lights or motors. Place the antenna farther away from the equipment causing the noise.
S
Steven GarciaAug 27, 2025
What to do if my RCA Home Theater Audio System DVD player does not start playback?
- S
  Samantha OneillAug 28, 2025
  If your RCA Home Theater System's DVD player isn't starting playback, make sure a disc is inserted correctly, with the playback side down and placed within the guide on the disc tray. Check that the disc isn't damaged or an incorrect type. Clean the disc if it's dirty. If a menu appears on the screen, press SETUP to turn it off. Also, verify that the rating level is not set or change it.
R
Regina TorresAug 27, 2025
Why is there no sound output when a function is selected on my RCA Home Theater Audio System Home Theater System?
- E
  Edward IbarraAug 27, 2025
  If you're experiencing no sound from your RCA Home Theater System when a function is selected, verify that all components are connected correctly. Also, check if the sound is muted by pressing the MUTE button on the remote. Finally, ensure the volume isn't turned down; adjust it as needed.
D
Douglas HerreraAug 26, 2025
What to do if there is no picture on my RCA Home Theater Audio System Home Theater System?
- M
  Melanie RamirezAug 26, 2025
  If you're not getting any picture on your RCA Home Theater System, first, make sure your TV is set to the correct video input mode to receive the DVD signal. Also, check that the video cable is securely connected to the jacks, and ensure your TV is powered on.
H
hthompsonAug 25, 2025
How to fix no power on my RCA Home Theater Audio System Home Theater System?
- J
  Joshua LawrenceAug 26, 2025
  If your RCA Home Theater System isn't powering on, ensure the power cord is securely plugged into the wall outlet.
W
William CarrilloAug 25, 2025
How to fix RCA Home Theater Audio System remote that is not working?
- N
  Natasha HowardAug 25, 2025
  If the remote for your RCA Home Theater System isn't working, try these steps: * Remove any obstacles between the remote and the player. * Move the remote closer to the player. * Point the remote at the player’s remote sensor. * Install new batteries in the remote.

RCA Home Theater Audio System Specifications

Player
Speakers
VCR

Player

Power

power supply	AC 120V ~ 60Hz
power consumption	100 W

Operating Environment

operating temperature	41 to 110 F (5 to 43 C)
operating humidity	5% to 85% (no condensation)

Audio Specifications

signal-to-noise speaker	More than 55dB
aux out	70dB
audio dynamic range	More than 80/80dB

Speakers

Speaker System

speaker system	Bass reflex
speaker unit (HWD) front/rear	114 x 87 x 108 mm
speaker unit (HWD) center	87 x 160 x 106.5 mm

Impedance

rated impedance front/center/rear	8 ohms
rated impedance subwoofer	6 ohms

Subwoofer Specifications

subwoofer speaker system	Bass reflex
subwoofer speaker unit (HWD)	330 x 174 x 320mm

VCR

Recording System

recording system	Rotary Two-head Helical Scanning
tape width	1/2 inch
tape speed SP	1 5/16 Inch/second (33.35 mm/s)

Tuner Channels

vhf channels	2-13
uhf channels	14-69
catv channels	1-125

Dimensions and Weight

dimensions (HWD)	96 x 430 x 370 mm
weight	8 Kg

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Operation and Installation Safety

Covers safe operation, installation, power, ventilation, and cord handling.

Service, Hazards, and Environment Precautions

Addresses servicing, attachments, lightning, overloading, and replacement parts safety.

GETTING STARTED

Connecting Your System

Guides for connecting TV, antenna, other equipment, speakers, and power.

Parts and Initial Operation

DVD PLAYER OPERATION

VCR OPERATION

Setup, Clock, and Channel Presets

Playback and Tracking Control

Recording Features and Timer Programming

How to record TV programs, timer functions, and audio modes.

TUNER OPERATION

Station Tuning and Presets

CUSTOMIZING FUNCTION SETTINGS

Video and Audio Adjustments

Parental Controls and Language

TROUBLESHOOTING

DVD Player Issues

Common problems with DVD playback and solutions.

VCR Issues

Common problems with VCR operation and recording, and solutions.

Related product manuals

6-Piece Home Theater Speaker Package

Preview: RCA RTD215 - Home Theatre System

RCA RTD215 - Home Theatre System

Preview: RCA RTD317

Preview: RCA RT2906

Preview: RCA RTD258

Preview: RCA RT2770

Preview: RCA RT2910

Preview: RCA RTD317W

Preview: RCA RTB10220

Preview: RCA RT2781BE

Preview: RCA RTB10323L