99
Fill the elds and press the SAVE button.
The phone will try to register to the SIP server.
If all accounts registering fail, the phone will display “No Service” by default.
Note: Should the IP PBX (SIP Server) require an authentication, a correct password
is needed. Make sure you are using the appropriate input method or enter the pass-
word via the web user interface.
Basic Conguration using phone keypad
You will need admin privileges to perform this and other congurations. By
default the phone will be in user mode, so you will need to perform a simple
procedure to switch to admin mode.
To Next Page
Loading...
