Chapter 3 25
Graphics contained within this publication are for representation only.
Chapter 3: Using the TV's Features
Channel Banner
There are several indicators that might appear when you press the DISPLAY button on the
remote. This display is called the Channel Banner. The following list describes the items on the
Channel Banner screen (left to right and top to bottom).
100-15 BEV The channel, sub-channel (if available for digital channels) and
program you're currently viewing are displayed.
Sleep Timer Off Sleep timer status.
Digital Cable Displays if the channel is digital or analog and the type of signal
your TV's receiving.
TV-14 D The current program rating.
Lock/unlock icon The lock or unlock icon appears if the channel is locked or
unlocked through the V-Chip option.
English The current audio the channel is broad cast ing.
Full 1080i The video format of the current channel's incoming signal.
DIGITAL TV-14 D
CABLE ENGLISH
100-15 BEV SLEEP TIMER
OFF
Program Information
FULL
1080i
Parental Controls and V-Chip
The choices in the LOCKS menu ( ) involves software inside your
TV which allow you to block TV programs and movies, called V-Chip.
TV programs can be blocked by age-based ratings, such as TV-MA,
which is explained on page 26. If available, TV programs can also be
blocked by content, such as adult language. This is explained on page
27. Movies can only be blocked by age-based ratings. This is explained
on page 27.
Once you block programs, you can unblock programs by entering a
password.
Note: Parental control settings are not available for HDMI or
Component inputs. These settings must be set in the connected
device's parental controls.
LOCKS
V-CHIP SET
NEW PASSWORD
:SELECT
:ADJUST
To Next Page
Loading...
Need help?
General
