control a variety of the device’s functions with the remote. If some of the features of your
devices don’t work, try programming the remote with a different code in the list using the
Direct Code Entry Method, until you find the code that allows the remote to control the
majority of your device’s functions. Different codes can provide different levels of
functionality.
Problem: The POWER key does not light when you press a key.
• You may have pressed an invalid key for the mode the remote is in.
• Make sure the remote is in the correct mode by pressing the corresponding device key
(TV, SAT•CBL•DTC, DVD•VCR). This tells the remote which device to operate.
• Make sure the batteries are fresh and are properly installed. Replace the batteries with
two new AAA batteries, if necessary (see the Battery Installation section).
Problem: The remote will not change channels on device.
• Make sure the remote is in the correct mode by pressing the corresponding device key
(TV, SAT•CBL•DTC, DVD•VCR). This tells the remote which device to operate.
• Press the ENTER key after you enter a channel number.
• Remove any obstacles between the remote and the device. Make
sure to aim the remote at the IR sensor on the device.
Problem: The device’s menu does not appear on the TV screen.
• Make sure you have connected the device to your TV properly and selected the correct
input. (See your devices’ Owner’s Manuals for proper connection procedures.)
• Make sure the remote is in the correct mode by pressing the corresponding device key
(TV, SAT•CBL•DTC, DVD•VCR). This tells the remote which device to operate.
• Menu access isn’t supported for all brands. You may need to use your original remote
control to access menu functions for some devices.
For more information, please visit www rcaaccessories.com Consumer Help Line: 1-800-
420-7968
Care and Maintenance
• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the remote only in normal temperature environments.
• Handle the remote gently and carefully. Don’t drop it.
• Keep the remote away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to keep it looking new.
To Next Page
Loading...
Need help?
General
