RCA RLC1906

11
REMOTE CONTROL KEY FUNCTIONS
INSTRUCTION
10
REMOTE CONTROL KEY FUNCTIONS
INSTRUCTION
(1) POWER button: Switches the set on from power on or off to power.
(2) AUTO button: Press to pc source picture auto adjust.
(3) MUTE button: Press to eliminate or restore the TV sound.
(4) P.MODE button:
Press to select preset picture mode.
(5) S.MODE button:
Press to select Sound mode button.
(6) ASPECT button:Press to select picture mode 4:3, 16:9etc.
(7)
DISPLAY button: Press to display current status,
TV channel ,input source.
(8) Numerical buttons:
Press number buttons for direct access TV channels.
(9) button:
Press to return to previous channel.
(10) button: Direct input numerical button
for 2 digit or 3 digit program.
(11) MENU button: Menu selection.
(12) EXIT button: Exit the OSD menu (On-screen display).
(13) SOURCE button:
Press to display all possible input sources
(14) SLEEP button: Sets the sleep timer。
(15) " "button: When OSD menu is on, press this button
to move the selection focus up or change settings.
(16) " "button: When OSD menu is on, press this button
to move the selection focus down or change settings.
(17) " "button: When OSD menu is on, press this button
to move the selection focus left or confirm the settings.
(18) " "button: When OSD menu is on, press this button
to move the selection focus right or confirm the settings.
(19) " ENTER "button: Press the button to confirm the operation.
(20) CH- button: Changes the channels down.
(21) CH+ button: Changes the channels up.
(22) VOL- button: Adjusts the volume down.
(23) VOL+ button: Adjusts the volume up.
(24) MTS button: Press to select the audio channels.
(25) CC button: Press to display the closed caption.
(26) AV button:Press the button to select the AV input.
(27) TV button:Press the button to select the TV input.
(28) S-Video button:Press the button to select the S-Video input.
(29) YPbPr
button: Press the button to select
the
YPbPr input .
(30) HDMI
button: Press the button to select
the HDMI input
(31) VGA
button: Press the button to select
the VGA input
.
19
24
25
22
23
26
27
20
21
28
29
30
31