21
You don't have to remember to switch the set off before you go to sleep.
The sleep timer automatically switches the set to standby after the
preset time has elapsed.
Press the SLEEP/ button on the remote control repeatedly
to select the number of minutes.
The display will appear on the screen followed by circle,
OFF, 15, 30, 60, 90, and 120 minutes.
When you are TV programs ,you can press the
button on
the remote control to return to the previous channel.
watching
SLEEP TIMER
RETURN FUNCTION
Press button on the remote control to the source menu.
The source menu rank as: TV - AV - YPbPr - HDMI - PC - Media .
SOURCE/
SOURCE INPUT SWITCH
BASIC OPERATION
Sleep Timer: Off
Press MENU to display the main menu or return to the previous menu or close the main
menu.
Press ◄/► to highlight the desired menu icon, and press ENTER to select.
If no buttons are pressed, the menu will close automatically after about 10 seconds.
Main Menu
20
BASIC OPERATION
If your TV will be turned on, you will be able to use its features.
Turning on the TV
First, connect power cord
When the indicator illuminates red is standby mode.
Press the POWER/ button on the remote control,
after the TV initialization finished,
the indicator turns to green. It means the TV is in power mode.
When you press the POWER/ button on the remote
control once again, the power/stand-by Indicator illuminates red
in standby mode.
correctly.
If you intend to be away on vacation, disconnect the power
plug from wall power outlet.
1. Press the VOL +/VOL- button on the control panel
VOL +/VOL- button on the remote control to adjust the volume.
2. If you want to switch the sound off, press the MUTE/ button
on the remote control.
3. You can resume the sound by pressing the MUTE/ button
on the remote control.
or the
Press the +/ - button on the control panel or the Numerical
on the remote control.
CH CH keys
TURNING THE TV ON
VOLUME ADJUSTMENT
PROGRAM SELECTION
To Next Page
Loading...
Need help?
General
