To Next Page

To Previous Page

OSD OPERATION

SCREEN SIZE

Highlight the item and Press◄/►to select. Movie/Dynamic/Standard/User.

Brightness/Contrast/Color/Tint/Sharpness

Picture Mode

Highlight the item and press ►, and a process bar appears,

then press ◄/►to adjust the value.

Tint is available when analog TV or NTSC-system AV .

Press MENU to back the Picture Settings menu.

ADJUSTING THE VALUES

Screen Size

Press ◄/►to selet the display aspect ratio till the picture is fit onto the screen.The

options are different according to different input source.

PC Wide/Dot by Dot.

Dot by Dot means NOT any scaling to original input pixels size.

AV/YPbPr/HDMI/TV Normal/Wide/Cinema/Zoom.

Zoom is suitable to view the analog TV which has wide(16:9) content on the 16:9panel.

Generally each aspect ratio is suitable for one input format.

For example Normal is suitable to watch common TV program.

Wide will do horizontal scaling on the wide panel.

Cinema is for the 2.39:1(perhaps marked as 2.40:1 on the disc) film

OSD OPERATION

PICTURE MENU

Press ▼/▲ to highlight one of the following options, then press ENTER or ► to enter

next sub-menu to adjust it.

Press EXIT to clear on-screen menu or MENU back to the previous menu.

When Picture Mode is set to User, the following settings can be manually adjusted.

Press PMODE shortcut button on the remote control to select picture mode directly.

PICTURE SETTINGS

RCA RLC2685A User Manual

Questions and Answers: