Why does my RCA TV picture have pixels that are always displaying the same color?
Your RCA TV is manufactured using high-precision technology; however, some pixels may not display correctly. Pixel defects within industry specifications are inherent and do not indicate a defective product.
What to do if my RCA TV remote control does not work?
If your RCA TV remote control isn't working, try these steps: Turn off the TV, unplug it, and remove the batteries from the remote for 30 minutes. Press the remote buttons and the power button randomly for 2 seconds, then reinstall the batteries. Also, ensure there's a clear line of sight between the remote's front sensor and the TV's remote sensor, which is housed with the power indicator light.
What to do if RCA TV shows weak signal or no program symbol?
If your RCA TV displays a weak signal or a 'no program' symbol, try changing the direction of your antenna and rescanning the channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
How do I make the picture cover the entire screen on my RCA TV?
If the picture on your RCA TV doesn't cover the entire screen: * If using HDMI or a digital TV channel, use the ASPECT button to switch to 16:9 format. * If using VGA, use the AUTO ADJUST function. * If using regular analog TV, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9.
Why is there picture but no audio on my RCA TV?
If you see a picture but hear no audio on your RCA TV, first ensure the audio cable is properly connected. Then, readjust the volume using the remote control. Also, the TV's tuner signal must not be lower than 65.
Why does my RCA TV turn off automatically after 5 minutes?
Your RCA TV may be turning off automatically after 5 minutes because it features a power-saving mode that activates when there's no signal for more than 5 minutes.
How to remove big black box in the middle of RCA TV screen?
If there is a big black box in the middle of your RCA TV screen, you likely have closed captioning turned on and are using TEXT1 – TEXT4. Change the setting to CC1 or turn off closed captioning to remove the box.
Why there is noise or trash pixels on the screen of my RCA TV?
Noise or trash pixels may appear on your RCA TV screen because when your TV’s resolution is higher than the digital channel’s broadcast resolution, the signal is up-converted to match your TV’s resolution.
Why my RCA TV cannot receive sufficient channels through the ATSC/NTSC tuner?
If your RCA TV isn't receiving enough channels through the ATSC/NTSC tuner, it might be due to a weak tuner signal. Change the direction of your antenna and rescan for channels. If you use cable, contact your cable provider to check the signal strength.
How to get sound on RCA TV from PC?
If you have no sound on your RCA TV from your PC, ensure that you have a 3.5 mm mini-jack cable connected from your PC’s sound output to the TV’s VGA STEREO INPUT.
To Next Page
General
