What to do if my RCA RLED1945A has picture but no sound?
If your RCA TV has a normal picture but no sound, check the volume settings to ensure mute is not activated, and verify that the audio system connections are correct.
How to fix ghost on RCA TV?
If your RCA TV has ghosting on the screen, try adjusting the antenna position, direction, or connection.
What to do if my RCA RLED1945A TV has no picture?
If your RCA TV shows no picture, ensure the power cord is correctly connected and the power is turned on. Also, verify that the video cable is properly connected. Select the correct input signal source using the source button, ensuring it matches your cable connection.
Why is my RCA TV showing interference?
If your RCA TV is showing interference, try removing or distancing any nearby electronic equipment, cars, motorcycles, or fluorescent lights. These items can sometimes cause interference with the TV signal.
What to do if the RCA TV picture is breaking up?
If your RCA TV picture is breaking up, try retuning the channel. This might resolve the issue.
Why is my RCA TV picture is very dim?
If your RCA TV picture is very dim, check to see if you are under POWER SAVING mode for your picture mode. Keep pressing the PICTURE button on the remote control to cycle out of POWER SAVING.
Why picture does not cover the entire screen on my RCA RLED1945A TV?
If the picture on your RCA TV doesn't cover the entire screen: * If you’re using HDMI or a TV digital channel, use the ASPECT button to switch to 16:9 format. * If you are using VGA, use the AUTO ADJUST function to adjust the screen. * If you are using regular analog TV, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9 to fill the screen, noting that this may distort the picture.
Why is my RCA RLED1945A picture is distorted or has abnormal sound?
Distorted picture or abnormal sound on your RCA TV may be due to interference from large electrical appliances, cars, motorcycles, or fluorescent lights. If the TV is close to the wall, try moving it to another room to see if the problem persists.
Why does my RCA RLED1945A TV has weak signal or no program symbol on screen?
If your RCA TV shows a weak signal or no program symbol on the screen, it might be due to the TV’s tuner signal being lower than 65 %. Try changing the direction of your antenna and rescan the channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
Why does my RCA RLED1945A TV picture is too dark?
If the picture on your RCA TV is too dark, adjust the contrast, brightness, and lamp settings from the OSD Menu.
To Next Page
General
