9
OPERATION INSTRUCTIONS
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time.
3. Touch CLOCK pad again.
NOTE:
·This is a 12 hour clock. When the oven is
first plugged in or when power resumes after
a power interruption, the display will show
ENTER CLOCK TIME. If you prefer to not
have the clock displayed, touch
STOP/RESET.
SETTING THE OVEN TIMER
1. Touch TIMER.
2. Enter the amount of time by touching the
number pads.
3. Touch START/MINUTE PLUS.
NOTE:
·The maximum countdown time you can
entered is 99 minutes and 99 seconds.
·Time countdown can be seen in display for
5 seconds before clock or cooking time is
returned to display.
· After the countdown time elapsed, the
buzzer will sound one beep.
·Touch TIMER and then touch STOP/RESET
to cancel TIMER during timing process.
SETTING MICROWAVE COOKING
A. One-stage cooking
1. Use the number pads to set a cooking
time. Cooking time up to 99:99.
2. The default setting is 100% microwave
power output, if you want to set a power
level other than 100%, touch POWER,
and then use the number pads to enter
the power level.
3. Touch START/MINUTE PLUS to start
cooking.
Use digits to set a cooking power level:
Number pad Cooking power
1,0 100%
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
0 0%
B. Two-stage cooking
Some recipes require different stages of
cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in “One-stage Cooking”.
Do not touch START/MINUTE PLUS.
2. SET STAGE 2:
Touch COOK then enter proper cooking time
and (lower) power level. (Most 2-stage
recipes use lower power for second stage.)
3. Touch START/MINUTE PLUS.
NOTE:
·
After stage 1 time has elapsed, one signal
sounds, signaling the beginning of stage 2.
·After total time elapsed, the system will
sound beeps with END in display. And the
To Next Page
Loading...
Need help?
General
