RCA RP3703

EN
6
Operating the Clock
Turning off Alarm
Silence the alarm momentarily
Press SNOOZE. The alarm will sound again
when the snooze period is over. (see
“Snooze Alarm Operation”).
Stop the alarm
Press ON/OFF. Then the alarm will be on
the following day at the same time.
Disable the alarm permanently
1. Press CANCEL button.
2. The WAKE 1 and WAKE 2 indicator will
be flashing.
3. Press WAKE 1 or WAKE 2 button within
3 seconds to deactivate the alarm function
permanently.
Tip: You can activate the previously
set alarm time by pressing
WAKE 1 WAKE 1
WAKE 1 WAKE 1
WAKE 1 or
WAKE 2WAKE 2
WAKE 2WAKE 2
WAKE 2 button.
Snooze Alarm Operation
This operation allows extra sleep time af-
ter the alarm is on. The alarm will be off
by pressing SNOOZE until the snooze pe-
riod is over. Snooze function can be used
repeatedly up to 2 hours. After this, the
alarm will turn off until the next alarm
conditions are met. Set the “quiet time”
as follow:
1. Press and hold SNOOZE.
2. Press REV or FWD to set the “quiet”
period (the default time is 9 minutes) from
1 minute to 30 minutes. Release button,
then the “quiet” period is set.
Seconds Time Display
The unit may display in seconds.
1. The clock should be in normal lock
mode.
2. Press REV or FWD to show seconds dis-
play.
3. Release to return to the hour and
minute display.
Auto Dimmer
Slide the AUTO DIMMER switch at the
back of the unit to the ON position. The
brightness of the LED display will vary au-
tomatically according to the environment.
Slide to the OFF position, the display will
remain at its brightest level.
AM FM