Connect Audio Output
( Aux Out / Line Out / Earphones)
Follow below picture to connect audio cable and device.
1. Press the button to turn off power of your projector before connection.
2. Use audio cable to connect follow below figure.
3. After connect and turn on both units. Your projector sound from external
device now.
4. After using , turn off both unit
Install USB Device And Micro Sd Card
Follow below picture to install USB and microSD card
Turn off the unit before install USB / microSD card.
13
MICRO SD
CABLE NOT INCLUDE
Station Amplifier
Audio cable
To Next Page
Loading...
Need help?
General
