RCA RS2652 User Manual

6
EN
Settings
Showing Demonstration
Press DIMMER / DEMO to turn on/off
demonstration mode. The demonstration scrolls
through all display operations.
Setting the Clock
1. Press and hold CLOCK until the hour flashes
on the display.
2. Press DIGITAL TUNING or to set the
hour and then press CLOCK to shift to minute
digits.
3. Press DIGITAL TUNING or to set the
minute.
4. Press PROG•SET to save settings and STOP
to quit setting.
Setting the Timer
1. Press and hold TIMER until the ON and clock
hour flashes on the display ( ON - timer on
time ).
2. For setting time, press DIGITAL TUNING
or to set the hour and then press TIMER
to shift to minute digits.
3. Press DIGITAL TUNING or to set
the minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press DIGITAL
TUNING or to select between CD /
TUNER .
6. Press TIMER to set volume. Adjust VOLUME
CONTROL to select desired volume level.
7. Press PROG•SET to save settings.
Press STOP to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer icon is displayed when timer is
activated.
Adjusting the Display Brightness
1. Press and hold DIMMER/DEMO for more than
2 seconds.
2. While the current dimmer level is displayed,
press and release DIMMER/DEMO repeatedly
to select the desired level (DIMM 1 - 3).
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
RS2652 EN 5/17/05 9:49 AM Page 12

RCA RS2652 Specifications

General

Brand	RCA
Model	RS2652
Category	Stereo System
Language	English