7
EN
Settings
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
The icon lights on the display when sleep
mode is activated.
View Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time.
Adjust Sleep Time
Press SLEEP again when the remaining sleep time
is displayed to change sleep time.
Note:
Sleep is automatically de-activated when
the unit is turned off.
Sound Features
Volume Control
Press VOLUME CONTROL or on the main
unit or press VOL or on the remote
control to adjust volume level. The bars on the
volume display increases and decreases to show
the change in volume level.
Bass Boost
Press BASS BOOST to turn on/off boosting the
bass frequency. The BASS icon lights on the
display when it is activated.
Muting Audio
Press MUTE on the remote to cut the sound.
(Remote Only)
Using Preset Equalizer Curves
Press EQ to toggle among FLAT, ROCK, POP, JAZZ,
CLASS and CUSTOM. The display shows your
selection briefly.
Creating a Custom Curve
1. Press EQ to select CUSTOM mode.
2. While CUSTOM is displayed, press DIGITAL
TUNING or to cycle among
displayed bass- and treble - range levels.
3. While BAS or TRE is displayed, adjust VOLUME
CONTROL to set the associated gain between
-10 - +10.
To Next Page
Loading...
Need help?
General
