Startup
8. Select the language.
(Escoja un idioma./Choisissez une langue.)
This feature lets you select English, Spanish, or French as tim language
for your on-screen displays.
A. Press MENUon the remote to display the TV/VCR MAINMENU.
B. Press 1 to display the SCREEN menu.
C. Press 3 to toggle the menu language between English, Spanish and
French. The default menu language when you first turn on the
TV/VCR is English.
TVIVCR MAIN MENU
Screen
Screen
I Picture Quality
2 Closed Captioning
3 Menu Language: English
(Idioma/Langue)
0 Exit
TV/VCR MAIN MENU
I Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
SETUP
I Auto Channel Search
AUTO CHANNEL SEARCH
9. Put Channels into Memory (Auto Channel Search)
A PressMENUon the remote to display the TV/VCR MAIN MENU
B. Press 5 to display the SETUP menu.
C. Press 1 to start AUTO CHANNEL SEARCH.
D. Allow the TV/VCR to search for all channels. Pressing any buttons
during Auto Channel Search will stop the search and only some
channels will be in the TV/VCR's memory. When the search is
finished the TV/VCR will automatically tune to the first channel
in the channel memory list.
Now scanning channel 14
Press any key to cancel
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
S Setup
SETUP
10. Set the Signal Type (optional)
The TV/VCR automatically selects tim signal type (cable or antenna)
when you run the Auto Channel Search in step 8. If you want to
change the signal type, follow the directions below.
A. Press MENUon the remote to display the TV/VCR MAINMENU.
B. Press 5 to display the SETUP menu.
C. Press 5 to toggle the Signal Type between ANTENNA and CABLE.
• After changing the signal type, you may need to re-enter the
channel number you are trying to receive.
• After changing the signal type, you may need to Auto Channel
Search again.
I Auto Channel Search
2 AddlRemove Channels
3 Set Auto Repeat
4 Auto Play: ON
5 Signal Type: CABLE
0 Exit
4
To Next Page
Loading...
Need help?
Picture
Weight and Dimensions
