RCA T13082 User Manual

Startup
11. Add or remove channels from the TVNCR's memory
You may want to add or remove channels ifsome of them are not
active, have weak signals, or you do not want them in your channel
memory. A channel that has been removed can still be selected by
pressing the remote control's number buttons.
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press 2 to display the ADD/REMOVE CHANNELS screen.
D. Follow the directions on the screen to add or remove a channel.
E. Add or remove more channels by entering the channel number or
pressing CHAN up or down.
TV/VCR MAIN MENU
I Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
SETUP
Auto Channel Search
Add/Remove Channels
ADD/REMOVE CHANNELS
Channel 10
is presently ADDED
Press CLEAR to remove
Press MENU to exit
12. Set the Time and Date (Clock)
To set the clock:
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 2 to display the TIME menu.
C. Press 1 to display the SET TIME and DATE screen.
D. Use the number buttons on the remote to enter the time.
• Press 0 before 1; 0 is added automatically before all other
numbers. Press 1 for AM or 2 for PM. Example: For a time of
1:07 PM, press O, then I, then O, then 7, then 2.
E. Use the number buttons on the remote to enter the date.
• The day of the week will automatically appear after you enter
the year.
• Press CLEAR on the remote at any time to change incorrect
entries.
F, Press MENU on the remote to start the clock.
G. To exit and return to TV viewing, follow the on-screen instructions.
H. To display the time and date, press D[SPLAY on the remote,
TV/VCR MAIN MENU
Screen
Time
TIME
I Set Time and Date
SET TIME AND DATE
Time(hh_mm )
Date --/--/--
Press MENU to cancel
SET TIME AND DATE
Time 01:07 PM
Date 10/31/98 Saturday
Press CLEAR to correct
Press MENU to set
13. Select a channel and adjust the volume
A. Press CHANNEL up or down or press the nmnber buttons on the
remote to select a channel.
Example: For channel 2, press 0 then 2. The channel number
is displayed on the screen.
For cable channels over 99, press and hold 1 until 1- - appears.
Then enter the next two numbers. Example: For channel 102, press
and hold 1. When 1 - - appears, press O, then press 2.
B. Press VOL left or tight to adjust the volume. The volume display
appears on the screen.
Ch 02
Volume-.. I ............ +
5

RCA T13082 Specifications

Picture

screen size - diagonal	13 inch
aspect ratio	4x3
screen type	Hi-Con (High Contrast)

Sound

sound type	Mono
speakers	Two Front-Fired
tuning capability	NTSC

Weight and Dimensions

product size	15 x 15 x 15 1/2 inches
packaging size	18.3 x 18.4 x 18.7 inches
approximate shipping weight	34.8 lbs