Startup
4. Connect antenna or cable-TV system
Connect a home antenna or a cable-TV system. Details onpages 29-32.
5. Connect external speaker and select speaker switch
setting (optional)
Details on page 33.
6. Plug in the TV/VCR
Attach the power cord to the back of the TV/VCR. Plug the power cord
into the wall outlet, matching the wide blade of the plug with the wide
slot in the outlet. Be sure to insert the plug completely.
You can also power the TV/VCR with the DC car cord. First. plug the
square end of the DC car cord into thejack on the back of the TV. Plug
the other end into the cigarette lighter socket of a car or truck. Operate
TV/VCR as usual.
Always unplug the DC car cord from the cigarette lighter socket before
you unplug the cord from the back of the TV/VCR. Removing the plug
from the TV/VCR first may damage the fuse in the DC car cord.
Note: Make sure the vehicle has a negative ground. The DC car cord is
designed for use only in cars or trucks with negative (-) ground
(negative terminal of car battery is connect to car chassis). The DC car
cord should never be used in cars with a positive (+) ground. If you are
unable to identify the negative (-) or positive (+) polarity of your car,
consult your car's owner's manual or check with an authorized service
station before use.
7. Turn on the TVNCR
Press POWER on the front of the TV/VCR or press TVor VCR on the
remote. The indicator in the POWER button on the front of the
TV/VCR will light when the TV/VCR is on.
IMPORTANT: To turn on the TV/VCR when it is in DC mode, you
must press and hold TVor VCRon the remote for more than 3 seconds.
This is to prevent the TV/VCR from being turned on accidentally and
draining the car battery.
3
To Next Page
Loading...
Need help?
Picture
Weight and Dimensions
