14
Playing a Tape
Operating Instructions
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or the TV’s video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
The VCR automatically turns on. The VCR indicator lights if the AUTO TV/VCR
feature is turned ON. The tape automatically begins playback if the safety tab
on the cassette has been removed and the AUTO PLAY feature is turned on.
3. Press PLAY, if necessary.
4. Press TRACKING up or down on the remote or the VCR to remove any streaks
from the picture if necessary. Details are on page 18.
5. Press STOP•EJECT on the VCR or STOP on the remote.
6. Press REW on the VCR or the remote.
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback. Also, if you press POWER while a tape is rewinding, the VCR turns
off automatically when it is completely rewound.
7. Press STOP•EJECT on the VCR to eject the tape once it is completely rewound.
To Next Page
Loading...
Need help?
General
