Do you have a question about the RCF Art 710-A and is the answer not in the manual?
Frequency Response | 50 Hz - 20 kHz |
---|---|
Horizontal coverage angle | 90° |
Vertical coverage angle | 60° |
Input signal | balanced/unbalanced |
Output connector | XLR |
Input sensitivity | 0 dBu |
Cooling | Convection |
Pole Mount/Cap | Yes |
Colour | Black |
Power | 700 W |
Woofer | 10" woofer, 2.5" voice coil |
Tweeter | 1" |
Input connector | XLR / Jack |
Protections | Thermal |
Controls | Volume, EQ |
Cabinet Material | Polypropylene |
Handles | 1 |
Dimensions (H x W x D) | 340 mm |
Type | Active 2-way speaker system |
Covers electrical safety, unauthorized access, handling, and general operational risks.
Guidelines for safe mounting, stacking, and system installation factors.
Advice on preventing hearing loss and managing audio cables to avoid noise.
Precautions on ventilation, overloading, controls, and cleaning methods.
Details on ferrite magnets and precision-built compression drivers for better performance.
750W digital amplifiers, input/output features, and heat dissipation design.
Polypropylene composite material, vibration damping, handles, pole mount, and stage monitor mode.
Overview of inputs, outputs, controls, LEDs, power socket, and fuse carrier.
Details the AES standard for XLR connectors (Ground, Hot, Cold).
Instructions for verifying and setting the correct voltage for the speaker.
Steps for connecting cables, turning on the mixer first, then the speaker.
Information on speaker stand mounting and safe rigging practices.
Explanation of amplifier protection LEDs and their meaning.
Frequency response, Max SPL, Horizontal and Vertical Coverage, Crossover Point for models.
Specifications for low and high frequency transducers across different models.
Total, low section, and high section power supply ratings for each model.
Details on signal input/output, power input, and analog input processing.
Size, weight, and color for each Art 7 Series model.