Need help?Do you have a question about the RCF 6001-A and is the answer not in the manual?
General| Horizontal Coverage Angle | 90° |
|---|---|
| Vertical Coverage Angle | 60° |
| Amplification | Class D |
| High Frequencies Power | 200 W |
| Low Frequencies Power | 400 W |
| Processor | DSP |
| Crossover Frequency | 1.8 kHz |
| Enclosure Material | Plywood |
| Woofer Size | 15 inches |
| Tweeter Size | 1.5 inches |
| Woofer Voice Coil | 3.0 inch |
| Connectors | XLR |
| Type | 2-way active speaker system |
| Power Output | 600W RMS (LF: 400W, HF: 200W) |
Read manual carefully before connecting and using the amplifier for reference.
Read all safety precautions with special attention for important information.
Follow operating precautions to ensure safe and proper use of the product.
Details on high frequency drivers, midrange units, and woofers used in the 4PRO Series.
Information on TAED Active Amplifier Technology and amplifier features.
Description of cabinet materials and flying hardware for 4PRO Series speakers.
Details on XLR connector standards and pin assignments for signal input.
Check voltage and power cord condition before connecting the speaker.
Explanation of LED indicators for limiter, thermal, short circuit, and AC voltage protection.
Information on voltage selection and fuse values, reserved for service centers.
Frequency response, SPL, coverage, drivers, power handling, and physical dimensions.
Details on input, processor, and amplifier specs including signal, crossover, and power.
Height, width, depth, weight, cabinet material, hardware, handles, and color.
To Next Page
