Need help?Do you have a question about the RCF SUB 708-AS II and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Power | 700 W RMS |
| Peak Power | 1400 W |
| Frequency Response | 35 Hz - 120 Hz |
| Max SPL | 131 dB |
| Protections | Thermal, RMS |
| Pole Mount/Cap | Yes |
| Input Signal | Line Level |
| Output Connector | XLR |
| Woofer Size | 18" |
| Woofer Voice Coil | 3 inches |
| Inputs | XLR, Jack |
| Outputs | XLR |
| Crossover Frequency | 80 - 120 Hz |
| Enclosure Material | Plywood |
| Cooling | Convection |
| Connections | XLR |
| Input Sensitivity | +4 dBu |
| Limiter | Built-in |
| Controls | Volume |
| Hardware | M20 pole mount |
| Handles | 2 |
| Input Connector | XLR, 1/4" Jack |
| Power Supply | 100-240 V |
Safety guidelines for connecting to mains power and ensuring correct voltage.
Precautions against liquids, unauthorized repairs, power loss, and physical impact.
Safe installation practices, stacking limits, and proper support.
Guidelines for product placement, control usage, and cleaning.
Importance of reading the manual and adhering to warnings.
Details about the parts and features of the Sub Series.
Information on the 700 Watt digital amplifiers and their features.
Features of the birch plywood cabinets and ergonomic design.
Description of XLR inputs, outputs, and IEC power sockets.
Explanation of limiter, signal LEDs, volume, and switches.
Details on the IEC AC socket and the main power switch.
Details on the AES standard for XLR connectors.
Safe steps for connecting power and signal cables.
Information on mounting the loudspeaker on a speaker stand.
Explanation of protection LEDs and fuse values for voltage setup.
Frequency response and maximum SPL for different models.
Details on speaker drivers, power output, and input/output controls.
Dimensions and weight of the subwoofers.
To Next Page
