Need help?Do you have a question about the RCF SUB 705-AS II and is the answer not in the manual?
General| Max SPL | 131 dB |
|---|---|
| Amplifier Power | 700 W RMS |
| Output Connectors | Stereo XLR |
| Input Sensitivity | -2 dBu / +4 dBu |
| Cooling | Convection |
| Connections | VDE connector |
| Cabinet Material | Baltic birch plywood |
| Hardware | Pole mount |
| Colour | Black |
| Type | Active Subwoofer |
| Peak Power | 1400 W |
| Sensitivity | 98 dB |
| Phase Switch | Yes |
| Woofer | 15" |
| Input Connectors | XLR |
| Input Signal | Balanced |
| Crossover Frequencies | 80 Hz |
| Protections | Thermal |
| Controls | Volume, Phase |
| Dimensions | 568 x 430 x 595 mm |
| Frequency Response | 40 Hz - 120 Hz |
Essential safety instructions for operation and installation.
Covers general safety, liquid ingress, repairs, and damage.
Instructions regarding mains voltage, earthing, and cable protection.
Guidelines for proper installation, anchoring, and stacking.
Guidelines for safe and optimal product operation.
Crucial information and warnings for product use.
Explains the layout and functions of the rear panel connectors and controls.
Details on limiter, signal, power LEDs, volume, phase, and crossover controls.
Details on frequency response, max SPL, and crossover points.
To Next Page
