To Next PageTo Next Page
Need help?Do you have a question about the RCF TT25A and is the answer not in the manual?
General| Max SPL | 131 dB |
|---|---|
| Woofer | 15" neo, 3.5" v.c. |
| Compression Driver | 1.5" neo, 3.0" v.c. |
| Horizontal Coverage Angle | 90° |
| Vertical Coverage Angle | 60° |
| Output Connectors | XLR |
| Input Connectors | XLR |
| Type | Active 2-way loudspeaker |
| Frequency Response | 50 Hz ÷ 20000 Hz |
Essential safety measures to prevent electrical hazards, damage, and ensure correct use of the equipment.
Guidelines for preventing noise, ensuring proper ventilation, avoiding overload, and correct cleaning procedures.
Core principles driving the TT+ series design, focusing on advanced engineering and user-centric tools.
Details on woofer, compression driver, and input section controls for the TT22-A and TT25-A models.
Describes XLR input, link output, input sensitivity adjustment, and side/floor coupling switch.
Explains indicators, 90 Hz high-pass filter, and the limiter circuit with RMS protection.
Details the main power switch and AC PowerCon input/output receptacles.
Specifies XLR pin assignments and the correct sequence for powering on speakers and mixers.
Guidelines for stand mounting, suspended installation, and warnings against improper rigging methods.
Lists fuse values for TT22-A and TT25-A models at different voltage settings (115V/230V).
Details frequency response, SPL, sensitivity, coverage, input signal, connector types, and processor parameters.
Provides details on amplifier power, cooling, physical dimensions, weight, cabinet, and hardware.
