12
ENGLISH
Move the brackets from the intial position
(figure A) to the locking position (figure B).
Secure the brackets on the locking position
with the quick lock pins (figure C).
Move the front bracket inside the opposite speaker
using the little knob (figure D).
Choose the tilt angle (figure E).
Insert the quick lock pin into the “Suspension Pin“
hole with the help of the litte knob (figure F).
REAR VIEW
SIDE VIEW
A
B
C
D
E
F
3. REAR PINS LOCKING
4. CHOOSING THE TILT ANGLE
To Next Page
Loading...
