RCS EPSILON ES4 - User Manual

Fuel Level Sensor
EPSILON
Models ES2 and ES4
Service manual

Summary

1. USE

2. Explosion Protection

3. Main Technical Characteristics

8. INSTALLATION

8.1 Preparation of fuel tank for sensors installation

Guides on preparing the fuel tank before sensor installation.

8.2 Preparation of sensor for installation

8.3 Installation of sensor on fuel tank

Explains the physical mounting process of the sensor onto the fuel tank.

8.4 Connection of sensor to control units

Describes how to connect the sensor to external control units and GPS equipment.

8.5 Sealing of sensor

9. CALIBRATION

10. MAINTENANCE

Appendix 1 Software Application eS Install

Appendix 2 UNIFIED PROTOCOL Epsilon Data Exchange (EDE)

Appendix 4 CONNECTION OF SENSORS ES2 AND ES4 TO CONCENTRATOR OF FUEL LEVEL SENSORS DALCON

Appendix 5 CONNECTION OF SENSORS ES4 TO ONBOARD MONITORING CONTROLLERS OF TRANSPORT SERIES АвтоГРАФ-GSM

Appendix 6 CONNECTION OF SENSORS ES4 TO ON-BOARD CONTROLLER OF TRANSPORT NAVIGATION Teletrack TT-221

Appendix 7 CONNECTION OF SENSORS ES2 TO TRANSPORT MONITORING APPLIANCE IntelliTrac A1

Appendix 8 CONNECTION OF SENSORS ES2 TO TRANSPORT MONITORING APPLIANCE Teltonika MF4100(4200)

Appendix 9 Connecting sensors to the subscriber terminal ES2 M2 M-Cyber GLX

Appendix 10 Connecting sensors to the devices ES4 transport monitoring LOCARUS 702;702 X

Appendix 11 Using frequency output mode

RCS EPSILON ES4 Specifications