RCS EPSILON ES4 User Manual

12
unified protocol EDE of bus RS- 485 or RS-232 or in an analog signal (only the level),
depending on the model.
Data about fuel level may be issued in the form of 10-, 12-or 16-bits value, the temperature data
- in the form of 8-bits value.
For determination of the amount of controlled fuel the procedure of calibration of fuel tank
should be carried out. During this procedure the dependence between the amount of fuel and its
level, measured by sensor (by the code of the level), is set.
Controlling of the calibration procedure and setting of parameters of data exchange with the
help of eS Install program are described in details in Appendix 1.
Protocol of data exchange EDE is shown in Appendix 3.

RCS EPSILON ES4 Specifications

General

Brand	RCS
Model	EPSILON ES4
Category	Accessories
Language	English