To Next PageTo Next Page
Need help?Do you have a question about the REA TD-GPT-U and is the answer not in the manual?
Explains safety instructions and important information symbols used in the manual for personal and equipment safety.
Lists and identifies the physical parts and their functions, including levers, keys, LEDs, and connectors.
Explains how the printer enters and exits sleep mode, and how to enable/disable this option.
Describes how to switch off the printer completely using the OFF/NEXT key.
Explains the intelligent battery charging circuit and the importance of using the correct power supply.
Explains the initial low-current charge for discharged batteries to prevent damage, taking 1-5 minutes.
Describes the rapid charging phase, signaled by a flashing LED, taking about 4 hours for empty batteries.
Details the mode to maintain full charge, involving periodic short bursts of fast charging.
Explains how the printer operates in sleep mode and is reactivated via the USB interface without data loss.
Advises on identifying the correct printable side of the thermal paper roll.
Specifies the required paper width, diameter, weight, and recommends REA paper rolls.
Describes the functions of the FEED/ENTER key, including waking from sleep mode and feeding paper.
Explains how to perform a self-test to verify printer functionality and print software version.
Details the functions of the OFF/NEXT key, including powering off and navigating menus.
Provides a step-by-step example of navigating the OPD menu and changing printer settings.
Resets printer to batch file parameters by holding OFF/NEXT key for 3 seconds.
Initiates a test print by holding FEED key for 3 seconds after switching on.
Displays received data as hexadecimal and ASCII by holding FEED key after switching on without paper.
Explains the process for obtaining free repairs during the warranty period.
Outlines the procedure for returning the unit for repair, including shipping responsibilities.
States limitations on REA Elektronik's liability for consequential or incidental damages.
Advises contacting REA Elektronik or a distributor for service after the warranty period ends.
General