REA TD-GPT-U User Manual

© REA Elektronik GmbH, D-64367 Mühltal / Germany
 +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U - February 2012- Page 11 of 18
REA
Elektronik
GmbH
Rationalisierung
•
Entwicklung
•
Automation
Elektronische Geräte und Systeme
8.3 OFF / NEXT key
By holding down the OFF/NEXT key for more than 3 seconds during operation the printer switches off. As
operator feed back, the Status LED flashes shortly red.
Key FEED/ENTER Key OFF/NEXT Action
Pressed not pressed Paper feed one line
Pressed longer than 2 seconds not pressed Continuous paper feed
Pressed while switching on, less
than 1 second
not pressed Wake up, no paper feed
Pressed while switching with
inserted paper longer than 2
seconds
not pressed Self test
Pressed while switching on without
paper and longer than 2 seconds
not pressed Enable Hexdump Mode
Pressed in Hexdump Mode (without
paper)
not pressed Disable Hexdump Mode
Not pressed release key in less than 1 second Form feed 1 Line
Not pressed press key longer than 3 seconds Switch off
Pressed pressed Enter setup menu
9 Printer setup
The most important settings of the printer can be changed with a few key strokes using the built in OPD-Menu®
(OnPaperDisplay). The menu can be accessed always and is easy and comprehensive.
The menu can be operated just by using the OFF/NEXT und FEED/ENTER key.
Key FEED/ENTER Key OFF/NEXT Action
Pressed not pressed Increase value
not pressed pressed Select next menu point
pressed pressed Leave menu and save new settings

REA TD-GPT-U Specifications

General

Brand	REA
Model	TD-GPT-U
Category	Printer
Language	English