To Next Page

To Previous Page

REA VeriCube Operating Manual Version 2.16 – 11/2020 Page 65 of 119

11.1.3 Camera sideways

The device stands either on its long side or on its short side. Plastic strips are

inserted in the side walls, so that they are not scratched when the device is moved

on the table. The codes to be measured are, for example, on cans, bottles or parts,

which can be positioned in front of the device, so that the measurement conditions

are maintained correctly. Since the long sides and the short side change the distance

from the floor space, the respectively optimal position can be selected in this way. If

this is not sufficient, the product or the REA VeriCube and the product can

additionally be placed on a lifting table and thus the optimal measurement position

can be set.

Picture: Device positioned sideways with the product in front of the device

Questions and Answers:

Need help?

Do you have a question about the REA VeriCube and is the answer not in the manual?

REA VeriCube Specifications

General