EasyManua.ls Logo

ReachFar RF-V8 User Manual

ReachFar RF-V8
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GPS tracker& SOS communicator
Important, please note:
This tracker is designed to guard against theft &
positioning for property & life security, the
corporation assumes no liability or responsibility
for any behaviors violate other individual’s
privacy.
All GPS devices would have some position
deviation, the positions indicated by this product
are for reference only.
There may be delays caused by telecom
operators at certain circumstance, the
corporation is exemption from liability to property
& life security.
Main Function
GSM quad-band network, GPS location
Tracking via website / ISO app/ Android app / we
chat / SMS
Trace replay
Geo-fence alert
Vibrating sensor burglar alarm with 4 levels of
sensitivity
Sound sensor burglar alarm
Remote listening function
Low battery alert
SIM-changing alert
Accessories:
1* Host
1* Wall charger
1*12V/DC in car charger
1*12/24V/DC in power supplier
1* USB cable
1* User manual
Question and Answer IconNeed help?

Do you have a question about the ReachFar RF-V8 and is the answer not in the manual?

ReachFar RF-V8 Specifications

General IconGeneral
BrandReachFar
ModelRF-V8
CategoryGPS
LanguageEnglish

Summary

Important, please note:

Product specification

Prepare for work

Switch on

Indicator light directions

Platform tracking

APP tracking

Wechat tracking

SMS Function settings

Setting master-control number

Set the primary phone number for controlling the tracker via SMS commands.

Setting other SOS phone numbers:

Configure up to four additional emergency contact numbers for the tracker.

SMS Function settings

Method one:

Set multiple SOS numbers in a single SMS command.

Method two:

Set SOS numbers individually via SMS commands.

Empty master-control number & sos numbers

Language selection, settings changing

Remote listening function

Inquiry function

Inquiry the tracker location:

Obtain current GPS location data via SMS command.

Inquiry tracker situation

Check device status, signal strength, battery, and operating mode via SMS.

Turn on burglar alarm

Turn on/off vibrating sensor burglar alarm

Activate/deactivate motion-sensitive burglar alarm with adjustable sensitivity.

Turn on/off sound sensor burglar alarm

Activate/deactivate sound-detection burglar alarm for ambient noise monitoring.

Alter burglar alarm method

Other automatic alarm functions:

Low battery charge alert

Receive SMS notification when battery level drops below 10%.

Change SIM card alert

Receive SMS notification when the SIM card is changed.

Changing interval of the position data upload

Turn on/off data upload

Turn on/off indicator light

Change password

Setting GPRS APN data

Precautions:

Commands List