voff#(turn off vibrating sensor burglar alarm)
Turn on/off sound sensor burglar alarm
The master-control phone number send SMS
message like:
non#(turn on sound sensor burglar alarm, when
this tracker monitor the sound of surroundings over
45 Db, alarm message will be sent to the
master-control phone number.)
ntim,<valuer>#(changing delay function of sound
sensor burglar alarm. For example: ntim,10#
means no repeat alarm when sensed sound within
10 minutes. Factory default is 1 minute.)
noff#(turn off sound sensor burglar alarm)
Alter burglar alarm method
The master-control phone number send SMS
message like:
mod,1#(when the alarm occurs, firstly, message will
be sent and then phone call will be made to the
master-control phone number. This is the factory
default setting.)
mod,2#(when the alarm occurs, only phone calls
will be made to the master-control phone number.)
mod,3#(when the alarm occurs, only SMS
messages will be sent to the master-control phone
number.)
Other automatic alarm functions:
Low battery charge alert: when the battery life is
less than 10%, the tracker will send SMS message to
the master-control phone number: Less than 10% of
battery . Please charge the device immediately.
Change SIM card alert: when the SIM card is
changed the tracker will send SMS message to the
master-control phone number: Alert, SIM card has been
changed.
Changing interval of the position data upload:
To Next Page
Loading...