Need help?Do you have a question about the Ready Remote 24921 and is the answer not in the manual?
Diagram illustrating the physical layout and connections of the main control unit.
Details the pin assignments and functions for the primary, relay, and auxiliary harnesses.
Notes regarding the location and identification of key components like the LED and Control Button.
Explains the Virtual Tach feature and its programming procedure for engine monitoring.
Procedure for teaching the system the engine's tachometer signal, if not using Virtual Tach.
Instructions for resetting system features or deleting programmed remote controls.
Procedure to diagnose the cause of remote start shutdowns based on LED flash codes.
Guide to accessing and modifying various system settings using the control button and remote.
A table detailing available system features and their programmable options.
Step-by-step instructions for programming new or replacement remote controls to the system.
Information on maintaining the system, focusing on remote control battery replacement.
Detailed instructions on how to open the remote and replace its coin cell battery.
Overview of system features and how to operate them.
How to use the car finder function to locate your vehicle by flashing parking lights.
Explanation of the remote start feature for warming up the vehicle and adjusting climate control.
Instructions on how to leave the vehicle running after removing the ignition key for short periods.
General| Type | Remote Starter |
|---|---|
| Channels | 2 |
| Remote Type | LCD |
| Security | Yes |
| Features | Remote start, keyless entry, trunk release |
| Transmitter | 2-way |
| Vehicles with | Automatic Transmissions |
To Next Page