iv
© 2010 Directed Electronics. All rights reserved.
What's Included
• Control Module
• One 1- Button Remote Control
• Control Button (Valet Switch)
• Antenna and Cable
• Harnesses
• Hood Pin Switch
• Hardware Kit
• Neutral Safety Switch
• Bypass Module (24921B only)
• Your Warranty Registration Card
• DVD - Do-It-Yourself Installation Video
• This Guide
Tools Required
• Digital Multi-Meter
• Drill
• 1/4 Drill Bit (for hood pin switch)
• Screwdrivers (Phillips and Flathead)
• Wire Stripper
• Solder Iron
• Electrical Tape
• Pliers
• Crimping Tool
• Safety Glasses
Note: The installation tools listed above may be optional. The required
tools will vary depending on your vehicle.
To Next Page