Need help?Do you have a question about the Real Flame CAPTIVA and is the answer not in the manual?
General| Fuel Type | Propane |
|---|---|
| BTU Output | 40, 000 BTU |
| Ignition System | Electronic Ignition |
| Venting | Vent-Free |
| Material | Steel |
| Heating Area | Up to 1, 000 sq ft |
| Safety Features | Oxygen Depletion Sensor (ODS) |
Appliance installation must be performed by an authorized person according to regulations.
Covers glass safety, flammable materials, aerosols, and supervision of children.
Alerts users that the outer glass panel gets extremely hot, requiring supervision.
Details actions that void the warranty and disclaim responsibility.
Advisories on placement, surface temperature, child supervision, and installation on combustible materials.
Guidance on choosing a suitable installation location for the heater.
Table of overall dimensions for Captiva 600 and 900 models.
Description of available flue cowl types for zero clearance installation.
Provides frameout dimensions for Captiva 600 and 900 models.
Specifies required clearances from combustible materials for safe installation.
General cautions and requirements for all flueing, including clearance and component integrity.
Crucial step to isolate power before any service or maintenance is performed.
Covers locating the remote, factory settings, and basic operation.
Procedure for setting the day/time and changing operational modes.
Procedure for teaching the remote control's RF code to the unit.
Steps to program wake-up times, temperatures, and daily schedules.
Illustrates how the heater operates in manual mode based on thermostat settings.
Detailed example of auto operation, showing flame and fan response to temperature changes.
Critical warnings regarding auto mode operation, temperature settings, and extended absences.
Step-by-step guide for installing the marble margin set around the firebox.
Table of dimensions for various optional mantelpiece models.
To Next Page
