Real Flame Silverton G8600E - Assembly Steps; Step One: Joining Side and Front Panels; Step Two: Attaching Base Panel

4
Step One
-Join left side panel (2) with left front panel (4) by securing 6 short allen screws (A) through
3 L-brackets (B).
-Repeat with right side panel (3) and right front panel (5).
Step Two
-Set base panel (1) on a flat surface as shown.
-Join panel (2) & (4), (3) & (5) by securing 8 short allen screws (A) through 4 L-brackets (B).
2
4 5
3
A
A
B
2
4 5
3
1
A
A
B