Need help?Do you have a question about the REALINN RL6200BT and is the answer not in the manual?
Explains how to check battery status and interpret charging indicators.
Instructions for connecting the scanner via Bluetooth, including pairing steps.
Guide for establishing a connection using the wireless mode with a USB receiver.
Steps for connecting the scanner to a computer using a USB cable.
Configures how the scanner uploads scanned data, including instant and storage modes.
Allows selection of different scanning modes like Manual Trigger, Continuous, and Auto-Sensing.
Adjusts the scanner's beep volume and enables/disables the beep sound.
Sets a time interval to prevent the scanner from reading the same barcode repeatedly.
Configures the aiming beam and white LED light for better scanning performance and visibility.
Allows conversion of scanned barcode characters to uppercase or lowercase.
Resets the scanner to its original factory default configuration.
Procedure to identify and confirm the type of barcode being scanned.
Configures characters appended to scanned data, such as carriage return or TAB.
Sets the scanner to operate as a Human Interface Device, similar to a keyboard.
Configures the scanner to work with driver and serial software for data transfer.
Adds specified characters to the beginning of the scanned barcode data.
Adds specified characters to the end of the scanned barcode data.
Removes a specified number of characters from the beginning of the scanned barcode.
Removes a specified number of characters from the end of the scanned barcode.
General| Brand | REALINN |
|---|---|
| Model | RL6200BT |
| Category | Barcode Reader |
| Language | English |
To Next Page
