Need help?Do you have a question about the REALINN RL3200DB and is the answer not in the manual?
Step-by-step guide to connect the scanner to a Bluetooth-enabled device.
Instructions for connecting the scanner using the 2.4GHz USB receiver.
Guide on how to connect and use the scanner via a USB cable.
Details on how to charge the scanner using various connection methods.
Explains different modes for scanning, like manual trigger or auto-sensing.
Describes how scanned data is transferred, including instant or storage modes.
General| Light Source | 650nm visible laser diode |
|---|---|
| Scanning Technology | Laser |
| Operating Current | 85 mA |
| Operating Temperature | 0°C to 50°C |
| Humidity | 5% to 95% (non-condensing) |
| Interface | USB, RS232 |
| Supported Barcode Types | Code 39, Code 93, Code 128 |
| Decode Capability | 1D barcodes |
| Operating Voltage | DC 5V |
| Storage Temperature | -20°C to 60°C |
| Scan Rate | 100 scans per second |
To Next Page
