Screen Time Setting
Please visit the website : http://www.barcoderead.net/time.html
Scan the setting code on the screen to adjust the time which
displayed on the screen of scanner. The time displayed on this web
page is synchronized with the time displayed on your computer.
Please ensure that the time displayed on your computer is correct.
Button Function Instruction
By default, the functions of Button 1 and Button 3 are turned off.
Before opening the button function, please read the introduction
about button operation in detail.
Button 1 : (Turn Off By Default)
(1) Press Button 1 for 1 second - Instant upload mode / Storage
mode switch
(2) Press Button 1 for 8 seconds - Upload stored data
Button 2 :
(1) Press Button 2 for 1 second - Turn on the bar code scanner / Scan
barcodes
(2) Press Button 2 for 8 seconds - Turn off the bar code scanner
Button 3 : (Turn Off By Default)
(1) Press Button 2 for 1 second - 2.4Ghz wireless mode / Bluetooth
mode switch
(2) Press Button 2 for 8 seconds - Linking to a Host
Turn on/off Button function:
Note 1
: The function of button 1, 3 is turned off by default.
Please scan the setting bar code“Button 1,3 - On”before using
Button 1 and Button 3.
Note 2
: To prevent pressing Button 1 or Button 2 by mistake during
scan barcodes, please scan the setting code “Button 1,3-off ”.
To Next Page
Loading...
