FEATURES
Front Loading Deck
State-of-the-art mechanism permits convenient front loading into
the
compartment. This design means you can stack com-
ponents or install this deck between shelves.
Dolby* Noise Reduction System
World-famous Dolby Noise Reduction system reduces tape hiss and
tape head noise, resulting in substantially improved signal-to-noise.
This gives an added benefit of extending the dynamic range.
Tape Selection Switch
To achieve optimum results from today's technologically advanced
ultra-low noise tapes and Chromium Dioxide tapes, bias and
equalization must be matched to the tape being used. The BIAS
and EQualization Switches provide this necessary matching —
resulting in superior signal-to-noise, wider frequency response and
greater dynamic range with either tape.
Dual VU Meters
Separate Right and Left channel Level Meters are illuminated and
can be used in conjunction with individually adjustable Right and
Left Channel Record Level Controls to precisely set recording
levels.
Headphone Jack
This is located at the lower right front of the unit for quick and
easy headphone listening. Microphone Jacks are right there too —
easy to get at.
* "DOLBY" and
DO
are trademarks of Dolby Labora-
DOL BY SYSTE M
tories Inc.
For your own protection, we urge you to record the Serial Number
of this unit in the space provided. You'll find the Serial Number on
the back panel of the unit.
Serial Number
SPECI FICATIONS
Tape System
:Standard PHILIPS Cassette
4-track stereo
C-30/60/90/120 (number indicates total
time for both sides)
Tape Speed
: 1-7/8 ips (4.75 cm/sec)
Frequency Response : Supertape Gold, 30-12, 000 Hz (± 3 dB)
(overall)
Signal-to-Noise
: Supertape Gold with Dolby, better than
(overall)
—58 dB
Distortion at +3 VU : 1.5% maximum
Cross-talk
: Better than — 60 dB
Wow & Flutter
: 0.12% maximum
(WRMS)
Erase Ratio
: Better than 60 dB
Output Level
: 0.58 volts (adjustable)
Output Impedance : Less than 10K ohms
Input Sensitivity
: Mic = — 63 dB (.053 mV)
Aux = — 18 dB (100 mV)
Input Impedance
Mic, more than 1 K ohms
Aux, 100 K ohms
Record Bias
: 85 kHz
Erase System
: 85 kHz AC erase
Fast-Forward/Rewind
Time
: Less than 110 seconds with C-60
Power Requirements : 120 volts, 60 Hz AC (220/240 volts, 50 Hz
for European and Australian models),
35 watts
Semiconductor
Integrated Circuits, 2
complement
Transistors, 14
Diodes, 13
Zener Diodes, 1
Dimensions
: 4-3/16" x 14-7/16" x 9-9/16" (HWD)
(10.6 x 36.7 x 24.3 cm)
Weight
: 11 lbs. (5.0 kg)
To Next Page
Loading...