Need help?Do you have a question about the Realistic sct-20 and is the answer not in the manual?
Describes the front loading mechanism for convenient access and stacking.
Explains the system's benefit in reducing tape hiss and improving signal-to-noise.
Details how BIAS and EQ switches match tape types for optimal results.
Illuminated meters indicate record/play signal levels per channel.
Instructions for turning the unit ON and OFF.
Connects headphones for listening and microphones for recording.
Uses VU meters and separate controls for precise recording levels.
Details functions of RECORD, REWIND, FAST-Forward, PLAY, STOP/EJECT, PAUSE keys.
Explains the DOLBY NR and EQ (Tape Equalization) buttons.
Connecting LINE OUT and LINE IN jacks to amplifier/receiver.
Using a DIN cord for connection in European models.
Adjusting output level controls to match amplifier input.
Steps for turning on the deck and playing a cassette tape.
Instructions for loading and removing cassettes from the unit.
Covers connections, tape selection, and setting BIAS/EQ/DOLBY NR.
Adjusting record levels using VU meters and starting the recording.
Pausing, stopping recording, and advancing tape with keys.
Recommendations for microphones and their placement.
Procedure for erasing previous recordings from a tape.
Procedures for monaural operation and line-in recording.
Explains using both sides of a cassette for stereo or mono signals.
Explains music dynamics, tape noise, and their interaction.
Details how the Dolby system enhances recordings during record and playback.
Recommends various Realistic tape types for different recording needs.
Provides advice on setting recording levels using VU meters for optimal results.
Explains erase protection tabs and re-recording/erasing tapes.
Correct usage of the Dolby NR switch during playback.
Details BIAS and EQ switch functionality and tape compatibility.
Explains how the Dolby System improves SNR and dynamic range.
Tips for duplicating tapes and proper tape storage.
Importance and methods for cleaning and demagnetizing tape heads.
Advice on avoiding rough handling, dust, heat, and humidity.
Importance of cleaning tape heads and parts for optimal performance.
Explains the need for periodic head demagnetization to prevent noise.
Recommends lubrication for moving parts to ensure proper operation.
Warning regarding erase protection tabs and the RECORD key.
Ensuring proper cassette seating and avoiding tape head contact.
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Wow and Flutter | 0.15% (WRMS) |
| Brand | Realistic |
| Model | SCT-20 |
| Playback Speed | 4.76 cm/s |
| Signal-to-Noise Ratio | 58 dB |
| Tape Speed | 4.76 cm/s |
| Motor | DC motor |
| Signal to Noise Ratio | 58 dB |
| Inputs | Line in |
| Outputs | Line Out |
| Power Supply | 120V AC, 60Hz |
To Next Page
