Realme Watch 3 - Power On;Off and Reboot

2
⚫ Pairing steps for Android user:
a. Search for “realme Link” in Google Play and download and install the realme Link App,
or update the existing one on your phone to the latest version.
b. Start the realme Link App, register an account and log into the App, and then enable
the relevant permissions according to the pop-up prompts. Click [Home] "+" in the
upper right corner→ [Add Device] and scan the QR code displayed on the watch
screen (or click the Bluetooth name of the watch). A dialog box will pop up on your
phone, which asks whether you are sure to start pairing. Click “Yes” and follow the
prompts to complete pairing.
⚫ Pairing steps for iOS user:
a. Search for “realme Link” in App Store and download and install the realme Link App,
or update the existing one on your phone to the latest version.
b. Start the realme Link App, register an account and log into the App, and then enable
the relevant permissions according to the pop-up prompts.
Note:
⚫ Upon successful pairing, the watch will show the pairing success screen and
synchronize the relevant information (date, notifications, etc.) of your phone.
⚫ In case of unsuccessful pairing, the watch will show the pairing failure screen
and return to the boot screen.
⚫ A watch can be connected to only one phone at one time. If you want to
connect it to another phone, please go to [Home] → [Device Manage] in the
App to delete the watch, and then unpair the watch in the Bluetooth device
list of your phone.
1.4 Power On/Off and Reboot
Power On
⚫ In power-off state, press and hold the side key to turn on the watch; or
⚫ In power-off state, the watch will be turned on automatically when connected to the
charger.
Power Off
⚫ In power-on state, press the side key to access the application list, and then select
“Settings→General→Power Off”.
⚫ In case of very low battery voltage, the watch will automatically shut down after
reminding you by vibrating.
Restart
⚫ In power-on state, press the side key to access the application list, and then select
“Settings→General→Restart”.
Force restart