GPS Vehicle Tracker User Manual
Page 5
is 0KM/H, and the carās direction is north.
How to Operate It
Arm/Disarm by Phone Calling
User could also use the first alarm-received mobile phone to call the
system SIM card number, so as to arm/disarm the system.
Arm: After hearing several ring tones, if the systems hang up the call
automatically, and call back you, it means that the system is armed.
Disarm: After hearing several ring tones, if the system hangs up the call
automatically, and donāt call back you, it means that the system is disarmed.
Note:
(1) There is no communication fee for this operation, it is a very convenient way to
arm & disarm the system.
(2)The SIM card inside the device must have the function of Caller ID Display.
(3) Only the 1st authorized mobile phone can realize this function.
SMS Control Instructions
User can send SMS instruction to operate the tracker by any mobile
phone, the format of the instruction is:
User Password(******)+ Control Code(XXX)
The default user password is 111111.
If the user password is changed, user should send the SMS instruction
with the new user password instead of 111111.
XXX is the control code, all the letters must be capital letters or small
letters.
There is no space between the user password & the control instruction.
Authorize the Alert-received Mobile
In case of alarm, if user wants to get the alert SMS from the tracker,
To Next Page
Loading...