GPS Vehicle Tracker User Manual
Page 6
he/she needs send the following SMS to program the system firstly:
111111*10 Mobile #1*20 Mobile #2*
Other functions:
Mobile #1: it is used to call the tracker No., system will be armed
/disarmed
Mobile #2: it is used to call the tracker No., system will send back
location SMS to the mobile #2
Example: User sends the SMS 111111*1013922713571*2013711189059* to the
tracker’s SIM card number, if there is any alert, system will send alert SMS to both of
these two mobiles. If user uses mobile 13922713571 to call tracker No., system will be
arm/disarm; if user uses mobile 13711189059 to call the tracker No., system will send
back location SMS to the mobile 13711189059.
l 111111PSWnnnnnn
This instruction is used to change the user password. The length of the
user’s password is 3~6 digits. Users are suggested to change to the new
password in use.
Example: User sends the SMS “111111PSW12345” to the system SIM card number,
and gets the confirmed SMS “111111PSW12345” in 3 seconds. It means that the user
password has been changed to 12345.
Remark: Please keep the password deep in mind if it is changed.
l 111111ARM
This instruction is used to arm the system.
The system will send back the confirmed SMS to you, such as “Unit
Armed! ……”
l 111111DSM
This instruction is used to disarm the system, to stop receiving the alert
SMS from the tracker.
The system will send back the confirmed SMS to you, such as “Unit
Disarmed! ……”
To Next Page
Loading...