5 RECONYX
®
, Inc.
Battery Specifications and Installation
The RECONYX
®
HyperFire 2™ camera uses 12 AA-cell batteries. We highly
recommend using either Energizer
®
Ultimate Lithium™ batteries or high-quality
NiMH Rechargeable batteries in your camera. Alkaline batteries are not
recommended. They do not provide as much power as Lithium or NiMH batteries
and are adversely affected by both hot and cold weather.
NiMH will operate at temperatures down to 0°F; Lithium batteries to -40°F.
NOTE: We strongly advise that you not attempt to run alkaline batteries in your
RECONYX
®
cameras as the performance will be very poor. Also, alkali
damage caused by alkaline batteries is not covered under warranty.
NOTE: Be sure to load batteries in the proper orientation (alternating
positive/negative, six in each battery bay).
Warning! Do not mix battery types! Damage to the camera can result and your
warranty will be voided if you mix battery types.
To Next Page
Loading...
