Need help?Do you have a question about the Reconyx HyperFire 2 and is the answer not in the manual?
Instructions for opening the camera to access batteries and memory card.
Step-by-step instructions for inserting and removing the SD card.
Guidance on re-formatting SD cards and resolving common issues.
Enables the camera to start capturing images after a short delay.
Access pre-programmed settings or customize camera functions.
Tests the camera's motion detection aim and coverage area.
Manage memory card, battery type, and view camera status.
Details on Quickset modes for different wildlife scenarios.
Configure motion detection, pictures per trigger, interval, and video settings.
Adjust quiet period, sensitivity, and time-lapse capture parameters.
Settings for time-based picture and video capture intervals and schedules.
Options for day/night capture and night mode illumination.
Add user labels to images and set a four-digit security code.
Set display format for time, temperature, and time format.
Configure camera date, time, location, and aspect ratio.
Reset camera settings to defaults or factory configuration.
Guidance on checking for and installing camera firmware updates.
Tips for improving nighttime image quality and resolving focus issues.
Strategies to prevent the camera from taking unnecessary pictures.
Tips for reliable triggering on animal movement and detection.
Troubleshooting common issues with SD cards and their operation.
Addressing camera shutdown and reduced battery life in cold temperatures.
Details of the manufacturer's warranty terms and conditions.
Information regarding the device's compliance with FCC regulations.
Important safety guidelines for operating the camera and accessories.
Tips to avoid issues like magnetic interference and condensation.
Key warnings regarding storage, liquids, power sources, and temperature.
Instructions for recording purchase details and registering the camera for warranty.
Legal information regarding trademarks and copyrights used in the manual.
General| Trigger Speed | 0.2 seconds |
|---|---|
| Flash Type | No Glow Infrared |
| Battery Life | Up to 1 year |
| Battery Type | 12 AA batteries |
| Weatherproof | Yes |
| Detection Range | 100 ft |
| Video Resolution | 1080p HD |
| Memory Card Type | SD/SDHC |
| Operating Temperature | -20°F to 120°F |
| Image Resolution | 3MP, 1080p HD |
To Next Page
